English
AF-NA200 Featured Image
  • AF-NA200

AF-NA200

Maikling Paglalarawan:

Ang kapangyarihan ng traction device ay direktang ipinapadala sa traction machine sa traction sheave nang walang intermediate reducer.Ang mga ratio ng traksyon ay karaniwang 2:1 at 1:1.Ang load ay 320kg～2000kg, at ang bilis ay 0.3m/s～4.00m/s.Kung ang kapangyarihan ng motor ay direktang ipinadala sa traction sheave nang hindi dumadaan sa reduction box, ito ay tinatawag na gearless traction machine, na karaniwang ginagamit para sa mga high-speed elevator at ultra-high-speed elevator na higit sa 2.5m/s.


Detalye ng Produkto

Mga Tag ng Produkto

Gearless-traction-machine-(5)

Modelo: AF-NA200

Permanenteng Magnet Synchronous Gearless Traction Machine

Boltahe: 220/380V
Elv.Load:320-630Kg Elv.Bilis:0.4-1.5m/s
Sheave Diam:200mm/240mm/320mm
Preno: DC110V 2.4A
IP proof: IP41
Ins.Classs:F
Roping:2:1/1:1
Tungkulin:S5-40%
Max.Static Load:2500kg
Timbang: 210Kg

Spec Elv Load (kg) Bilis ng Elv (m/s) Sheave Dia (mm) Sheave Groove Boltahe(V) Kasalukuyan(A) Power(KW) Bilis(r/min) Freq(Hz) Torque(Nm) Mga poste L (mm) L1 (mm) L2 (mm) β anggulo(.)
Roping:2:1
320-0.4A 320 0.4 200 3×Φ8×12 220 5 0.9 76 10.1 110 16 430 100 100.5 90
380 3
320-0.5A 320 0.5 200 3×Φ8×12 220 7 1.1 95 12.7 110 16 430 100 100.5
380 5
320-0.63A 320 0.63 200 3×Φ8×12 220 7 1.4 120 16 110 16 430 100 100.5
380 5
320-1.0A 320 1.0 200 3×Φ8×12 220 10 2.2 191 25.5 110 16 430 100 100.5
380 6
400-0.4A 400 0.4 200 4×Φ8×12 220 6 1.1 76 10.1 140 16 430 100 100.5
380 4
400-0.5A 400 0.5 200 4×Φ8×12 220 9 1.4 95 12.7 140 16 430 100 100.5
380 6
400-0.63A 400 0.63 200 4×Φ8×12 220 9 1.8 120 16 140 16 430 100 100.5
380 6
400-1.0A 400 1.0 200 4×Φ8×12 220 13 2.8 191 25.5 140 16 430 100 100.5
380 7
450-0.4A 450 0.4 200 4×Φ8×12 220 7 1.2 76 10.1 150 16 430 100 100.5
380 5
450-0.5A 450 0.5 200 4×Φ8×12 220 9 1.5 95 12.7 150 16 430 100 100.5
380 6
450-0.63A 450 0.63 200 4×Φ8×12 220 9 1.9 120 16 150 16 430 100 100.5
380 6
450-1.0A 450 1.0 200 4×Φ8×12 220 14 3.0 191 25.5 150 16 430 100 100.5
380 8
320-0.4B 320 0.4 240 3×Φ8×12 220 6 0.9 64 8.5 130 16 430 100 100.5
380 4
320-0.5B 320 0.5 240 3×Φ8×12 220 7 1.1 80 10.7 130 16 430 100 100.5
380 5
320-0.63B 320 0.63 240 3×Φ8×12 220 7 1.4 100 13.3 130 16 430 100 100.5
380 5
320-1.0B 320 1.0 240 3×Φ8×12 220 10 2.2 159 21.2 130 16 430 100 100.5
380 6
400-0.4B 400 0.4 240 4×Φ8×12 220 7 1.1 64 8.5 160 16 430 100 100.5
380 5
400-0.5B 400 0.5 240 4×Φ8×12 220 9 1.3 80 10.7 160 16 430 100 100.5
380 6
400-0.63B 400 0.63 240 4×Φ8×12 220 9 1.7 100 13.3 160 16 430 100 100.5
380 6
400-1.0B 400 1.0 240 4×Φ8×12 220 12 2.7 159 21.2 160 16 430 100 100.5
380 7
450-0.4B 450 0.4 240 4×Φ8×12 220 8 1.2 64 8.5 180 16 520 150 110.5
380 5
450-0.5B 450 0.5 240 4×Φ8×12 220 10 1.5 80 10.7 180 16 520 150 110.5
380 6
450-0.63B 450 0.63 240 4×Φ8×12 220 9 1.9 100 13.3 180 16 520 150 110.5
380 6
450-1.0B 450 1.0 240 4×Φ8×12 220 13 3.0 159 21.2 180 16 520 150 110.5
380 8
320-0.5C 320 0.5 320 3×Φ8×12 220 6 1.1 60 8 170 16 430 100 100.5
380 5
320-0.63C 320 0.63 320 3×Φ8×12 220 6 1.3 75 10 170 16 430 100 100.5
380 5
320-1.0C 320 1.0 320 3×Φ8×12 220 9 2.1 119 15.9 170 16 430 100 100.5
380 6
400-0.5C 400 0.5 320 4×Φ8×12 380 5 1.4 60 12 220 24 520 150 110.5
400-0.63C 400 0.63 320 4×Φ8×12 380 5 1.7 75 15 220 24 520 150 110.5
400-1.0C 400 1.0 320 4×Φ8×12 380 8 2.7 119 23.8 220 24 520 150 110.5
450-0.5C 450 0.5 320 4×Φ8×12 380 6 1.5 60 12 240 24 520 150 110.5
450-0.63C 450 0.63 320 4×Φ8×12 380 6 1.9 75 15 240 24 520 150 110.5
450-1.0C 450 1.0 320 4×Φ8×12 380 9 3.0 119 23.8 240 24 520 150 110.5
630-0.5C 630 0.5 320 5×Φ8×12 380 8 2.1 60 12 340 24 570 200 110.5
630-0.63C 630 0.63 320 5×Φ8×12 380 8 2.7 75 15 340 24 570 200 110.5
630-1.0C 630 1.0 320 5×Φ8×12 380 11 4.2 119 23.8 340 24 570 200 110.5
630-1.5C 630 1.5 320 5×Φ8×12 380 16 6.4 179 35.8 340 24 570 200 110.5
Lubid:1:1
320-0.4D 320 0.4 200 4×Φ8×12 220 5 0.9 38 5.1 220 16 570 200 110.5 90
380 3
400-0.4D 400 0.4 200 5×Φ8×12 220 6 1.1 38 5.1 270 16 570 200 110.5
380 4

Puna:1.ang makina ay maaaring gamitin para sa makina na walang silid.
2. Ang nasa itaas ay inirerekomendang halaga ng cut angle.ito ay opsyonal ayon sa praktikal na kondisyon.

  • Nakaraan:
  • Susunod:

    • Mga kategorya ng produkto