AF-CK200

Maikling Paglalarawan:

Ang kapangyarihan ng traction device ay direktang ipinapadala sa traction machine sa traction sheave nang walang intermediate reducer.Ang mga ratio ng traksyon ay karaniwang 2:1 at 1:1.Ang load ay 320kg～2000kg, at ang bilis ay 0.3m/s～4.00m/s.Kung ang kapangyarihan ng motor ay direktang ipinadala sa traction sheave nang hindi dumadaan sa reduction box, ito ay tinatawag na gearless traction machine, na karaniwang ginagamit para sa mga high-speed elevator at ultra-high-speed elevator na higit sa 2.5m/s.

Magpadala ng email sa amin

Detalye ng Produkto

Mga Tag ng Produkto

Modelo:AF-CK200

Permanenteng Magnet Synchronous Gearless Traction Machine

Boltahe: 380V
Elv.Load:630-1150Kg Elv.Bilis:0.5-2.5m/s
Sheave Diam:400mm/450mm
Preno: DC110V 2×1.3A
IP proof: IP41
Ins.Classs:F
Roping:2:1/4:1
Tungkulin:S5-40%
Max.Static Load:4000kg
Timbang: 350Kg

Spec	Elv Load (kg)	Bilis ng Elv (m/s)	Sheave Dia (mm)	Sheave Groove	Kasalukuyan(A)	Power(KW)	Bilis(r/min)	Freq(Hz)	Torque(Nm)	Mga poste	L (mm)	L1 (mm)	β anggulo(.)
Roping:2:1
630-0.5	630	0.5	400	4×Φ10×15	6	2.2	48	12.8	430	32	288	69.5	95
630-0.63	630	0.63	400	4×Φ10×15	6	2.7	60	16.0	430	32	288	69.5
630-1.0	630	1.0	400	4×Φ10×15	10	4.3	95	25.3	430	32	288	69.5
630-1.5	630	1.5	400	4×Φ10×15	14	6.4	143	38.1	430	32	288	69.5
630-1.6	630	1.6	400	4×Φ10×15	16	6.9	153	40.8	430	32	288	69.5
630-1.75	630	1.75	400	4×Φ10×15	16	7.5	167	44.5	430	32	288	69.5
630-2.0A	630	2.0	400	4×Φ10×15	18	8.6	191	50.9	430	32	288	69.5
630-2.0B	630	2.0	400	4×Φ10×15	18	8.5	170	45.3	480	32	288	69.5
800-0.5	800	0.5	400	5×Φ10×15	8	2.7	48	12.8	540	32	288	69.5
800-0.63	800	0.63	400	5×Φ10×15	8	3.4	60	16.0	540	32	288	69.5
800-1.0	800	1.0	400	5×Φ10×15	12	5.4	95	25.3	540	32	288	69.5
800-1.5	800	1.5	400	5×Φ10×15	18	8.1	143	38.1	540	32	288	69.5
800-1.6	800	1.6	400	5×Φ10×15	20	8.7	153	40.8	540	32	288	69.5
800-1.75	800	1.75	400	5×Φ10×15	20	9.4	167	44.5	540	32	288	69.5
800-2.0A	800	2.0	400	5×Φ10×15	23	10.8	191	50.9	540	32	288	69.5
800-2.0B	800	2.0	450	5×Φ10×15	23	10.7	170	45.3	600	32	288	69.5
800-2.5A	800	2.5	400	6×Φ10×15	28	13.5	239	63.7	540	32	300	75.5
800-2.5B	800	2.5	450	5×Φ10×15	29	13.3	212	56.5	600	32	288	69.5
1000-0.5	1000	0.5	400	5×Φ10×15	10	3.4	48	12.8	670	32	288	69.5
1000-0.63	1000	0.63	400	5×Φ10×15	10	4.2	60	16.0	670	32	288	69.5
1000-1.0	1000	1.0	400	5×Φ10×15	15	6.7	95	25.3	670	32	288	69.5
1000-1.5	1000	1.5	400	5×Φ10×15	23	10.0	143	38.1	670	32	288	69.5
1000-1.6	1000	1.6	400	5×Φ10×15	26	10.7	153	40.8	670	32	288	69.5
1000-1.75	1000	1.75	400	5×Φ10×15	26	11.7	167	44.5	670	32	288	69.5
1000-2.0A	1000	2.0	400	5×Φ10×15	28	13.4	191	50.9	670	32	288	69.5
1000-2.0B	1000	2.0	450	5×Φ10×15	28	13.4	170	45.3	750	32	288	69.5
1000-2.5A	1000	2.5	400	6×Φ10×15	34	16.8	239	63.7	670	32	300	75.5
1000-2.5B	1000	2.5	450	6×Φ10×15	36	16.6	212	56.5	750	32	300	75.5
1150-0.5	1150	0.5	400	5×Φ10×15	12	3.9	48	12.8	780	32	288	69.5
1150-0.63	1150	0.63	400	5×Φ10×15	12	4.9	60	16.0	780	32	288	69.5
1150-1.0	1150	1.0	400	5×Φ10×15	17	7.8	95	25.3	780	32	288	69.5
1150-1.5	1150	1.5	400	6×Φ10×15	29	11.7	143	38.1	780	32	300	75.5
1150-1.6	1150	1.6	400	6×Φ10×15	29	12.5	153	40.8	780	32	300	75.5
1150-1.75	1150	1.75	400	6×Φ10×15	29	13.6	167	44.5	780	32	300	75.5
1150-2.0	1150	2.0	400	6×Φ10×15	33	15.6	191	50.9	780	32	300	75.5
Roping:4:1
2000-1.0	2000	1.0	400	5×Φ8×12	15	6.7	95	25.3	670	32	288	69.5	Ayon sa mga kondisyon sa pagtatrabaho
2000-1.5	2000	1.5	400	6×Φ8×12	28	13.4	191	50.9	670	32	288	69.5	Ayon sa mga kondisyon sa pagtatrabaho

Puna:1.ang makina ay maaaring gamitin para sa makina na walang silid.
2. Ang nasa itaas ay inirerekomendang halaga ng cut angle.ito ay opsyonal ayon sa praktikal na kondisyon.

Nakaraan: AF-CK300

Susunod: AF-CK100